Seeking to buttress its position as the leader in ultra-precise mechanical chronographs, TAG Heuer Replica launched a concept watch, the Mikrotimer Flying 1000. It did what no previous mechanical timepiece could do: measure intervals to the nearest 1/1,000-second. Like the 1/100-second Mikrograph, this model had two separate power trains, each with its own oscillating and escapement system.

This spring works in tandem with a specially conceived lever escapement. The Tag Heuer Replica Watch balance spring’s vibrations are started and stopped with the aid of a column-wheel-controlled impulse-and-braking system, which acts directly on the balance spring’s staff.

The center-mounted elapsed-seconds hand sprinted around the dial 10 times per second. To read elapsed time to the 1/1,000-second, you had to add the 1/100 and 1/1,000-second quantities, shown on two scales by the long, green center-mounted chronograph seconds hand, to the 1/10-second measurement shown on the subdial. The AAA+ Tag Heuer Replica had a power reserve of just 3.5 minutes. The time-of-day function worked in the conventional manner, using an oscillator with a frequency of 28,800 vph.

Carrera Heuer 02 Tourbillon Chronograph

The movement of this watch was derived from TAG Heuer’s in-house chronograph movement, Caliber CH-80, which Fake TAG Heuer launched in 2014.The watch has a flying tourbillon, 32 mm in diameter and made of titanium and carbon. The movement, which has a single barrel and is COSC-certified, has a power reserve of about 65 hours. TAG Heuer makes the main movement components itself and assembles the movement at its factory in Chevenez.The case, like that of the Carrera Heuer 01, is modular and has 12 parts.